Knurled T-Bar Kitchen Cupboard Handles & Knobs
Use your code at checkout One offer per order
Colours may vary slightly between products. For the closest match, choose the same colour from the same collection.
Send us a photo of your space or a project image. We’ll email you a preview, free of charge.
These knurled T-bar handles have a straight 13mm round bar that runs past its two round posts, so both ends overhang. A diamond-pattern knurl covers the grip between a short smooth end cap at each end, and the posts are left smooth.
Choose gold, antique brass or black T-bar handles with 96mm, 128mm, 160mm or 224mm hole centres, giving overall lengths of 132mm, 165mm, 195mm and 260mm respectively. Every size comes in all three colours, and each handle has a 35mm projection.
Use them as kitchen cupboard handles on doors or as drawer handles, or for furniture upcycling projects. The same knurled design is also available as a single-hole T-bar knob option, 55mm long, for doors and drawers where a single fixing point is wanted.
The finishing process is brushed metal plating with a spray lacquer. To fit, drill the holes where the handle is to sit, insert the screws from the back of the panel and tighten them into the handle with a Phillips screwdriver. M4 screws in 25mm and 40mm lengths are supplied.
| Product Type | Cupboard and drawer handles, with a single-hole T-bar knob option |
|---|---|
| Finish / Colour | Gold, black or antique brass; brushed metal plating with spray lacquer |
| Design | Smooth end caps at both ends of the knurled grip; smooth round posts |
| Shape / Profile | Handles: T-bar, a straight round bar on two round posts with overhanging ends; single-hole knob option: short round bar on one post |
| Texture | Diamond-pattern knurled grip |
| Hole Centres | 96mm, 128mm, 160mm or 224mm; single hole for the knob option |
| Overall Length | 132mm (96mm hole centres), 165mm (128mm), 195mm (160mm), 260mm (224mm) |
| Length (single-hole option) | 55mm |
| Projection | 35mm |
| Bar Diameter | 13mm |
| Mounting | Screws inserted from the back of the panel into the handle; Phillips screwdriver required |
| Supplied Fixings | M4 screws, 25mm and 40mm lengths |
| Suitable For | Kitchen cupboard doors, drawers, furniture upcycling projects |
In-stock items usually take 1 to 3 working days to process. After dispatch, estimated delivery times are:
Delivery charges depend on your order value and are confirmed at checkout.
Under our voluntary 90-day returns policy, you can request a return within 90 days of delivery for eligible items. Items must be unused and uninstalled, with all parts and original packaging. You cover return postage if you change your mind. Please email support@nesform.com before returning an item. Your statutory rights are unaffected.
Read our Shipping Policy and Refund Policy for full details.
We issue refunds within 7 calendar days. See our Refund Policy for when this period starts. Your bank or card provider may take additional time to show the credit after we issue the refund.
Size guide
Hole centres and overall length are two different measurements. Here’s how to check both for a handle with two fixing holes.
01 For the right fit
Measure from the centre of one fixing hole to the centre of the other. Use a ruler marked in millimetres.
Replacing existing handles? Match the distance between the centres of the holes already in your door or drawer.
02 For the overall size
Measure the full length of the handle, from one end to the other. This tells you how much space it takes up.
Check the space available. Handles with the same hole centres can have different overall lengths.
Diagrams show a two-fixing handle from the back. For handles with three or more fixing holes, check every fixing position in the product’s dimension drawing.
If you're replacing a handle with the same fixing method, check that the new handle's hole centres match the existing holes. Cupboard doors and drawers may have different hole spacing, so check both before ordering. See our Size Guide for help with measuring.
Door and drawer front thicknesses vary, so the supplied screws may not suit every installation. Check the fixing details in What's Included & Installation. If you need a different length, make sure the replacement screws have the correct thread for your chosen handle.
You can use one length throughout, or mix lengths within the same design. Longer handles are an option for wide drawers and tall cupboard doors. Before choosing, mark out the overall length on your furniture with masking tape to compare the proportions. For existing holes, check the hole centres first.
Finishes with the same name can look different across products and brands. A brass or gold finish may be warmer, paler or more yellow than your existing fittings. For the closest match, choose the same colour from the same collection. If you're matching another brand, compare a physical sample in the room where it will be used.
Check Specifications for the material used in your chosen design. A gold or bronze colour does not necessarily mean solid brass. For routine dusting, use a soft, dry cloth and avoid abrasive cleaners. Care requirements vary by finish; contact us for advice on a particular finish or how it wears over time.
Check the shape and side view, including the space available for your fingers. For an edge pull, consider how you'll reach and grip it on the door or drawer. Allow enough clearance from nearby doors, walls and worktops. A product sample can help you judge the feel before ordering a full set.
Yes. Contact us with the product, colour and your delivery postcode. We'll confirm availability, cost and delivery before you pay. Ask for a product sample if you want to check the weight and grip as well as the colour. A finish swatch won't show how the handle feels in use. See our Samples page for details.
